Chamber Retort Furnaces for Catalytic Debinding also as Combi Furnaces for Catalytic or Thermal Debinding FURNA PECKA ZA VISOKA TEMPERATURA

NRA 40/02 CDB and NRA 150/02 CDB

The chamber retort furnaces NRA 40/02 CDB and NRA 150/02 CDB are specially developed for catalytic debinding of ceramics and metallic powder injection molded parts according to the BASF CATAMOLD®-method. They are equipped with a gastight retort with inside heating and gas circulation. During catalytic debinding, the polyacetal-containing (POM) binder chemically decomposes in the oven under nitric acid and is carried out of the oven by a nitrogen carrier gas and burned in an exhaust gas torch. Both furnaces have a comprehensive safety package to protect the operator and the surrounding. Exectuted as combi furnace series CTDB these models can be used for either catalytic or thermal debinding incl. presintering if necessary and possible. The presintered parts can be easliy transferred into the sintering furnace. The sintering furnace remains clean as no residual binder can exhaust anymore.

• Process retort made of acid-resistant stainless steel 1.4571 with large swiveling door
• Four-side heating inside the retort through chromium steel tube heating elements for good temperature uniformity
• Horizontal gas circulation for uniform distribution of the process atmosphere
• Acid pump and acid vessel (to be provided by the customer) accommodated in the furnace frame
• Gas-fired exhaust gas torch with flame monitoring
• Extensive safety package with redundantly operating safety PLC for safe operation with nitric acid
• Large, graphic touch panel H 3700 for entering data and for process visualization

Version NRA 40/02 CDB

• Tmax 200  °C
• Gas supply system with fixed values

Additional version NRA 150/02 CDB

• Automatic gas supply system for nitrogen with mass flow controller
• Adjustable acid volume and correspondingly adjusted gas spply volumes

Version NRS .. CTDB

• Safety package for thermal, inert debinding
• Availabel for 600 °C and 900 °C with atmosphere circulation

Additional equipment

• Scale for the nitric acid vessel, connected to the PLC monitors the acid consumption and visualizes the fill level of the acid vessel (NRA 150/02 CDB)
• NCC software package for visualization, control and charge documentation of the process
• Automatic gas supply system for nitrogen with mass flow controller (NRA 40/02 CDB)
• Adjustable acid volume and correspondingly adjusted gas spply volumes (NRA 40/02 CDB)
• Lift truck for easy loading of the furnace
• Cupboard for acid pump
• Emergency tank for flushing in case of a failure